Standard Hillside Washers in diameters - 3/8"-1/2", 5/8"-3/4", 1"-1-1/8" Combinations. Material -- gray iron. These washers are sand castings. Flanged Hillside Washers in the following sizes -- 1/2"-5/8", 3/4"-7/8" & 1"-1-1/8" combinations. Material -- ductile iron. Stocked in Red Paint, Gray Paint & Hot Dip Galvanized. These washers are sand castings. The Flange design eliminates the need to weld an extra plate onto the Washer. No special washers are needed in the assembly of the Tengco Flanged Hillside Washer. Product Specifications for In-Stock Cast Hardware Flanged Hillside Washer Cast Grey Iron Sizes Finish Box Qty Lbs/M Tengco P/N 3/8 Plain 350 244.00 SWH38-P 1/2 Plain 125 328.94 SWH12-P 5/8 Plain 100 426.05 SWH58-P 3/4 Plain 75 451.09 SWH34-P 7/8 Plain 50 828.29 SWH78-P 1" Plain 30 1,242.40 SWH1-P 1-1/8-1-1/4 Plain 15 3,084.20 SWH11814-P Flanged Hillside Washer Cast Ductile Iron - Patent Pending ** Sizes Finish Box Qty Lbs/M Tengco P/N 1/2-5/8 Hot Dip Galv 40 1,174.4 SWH1258.1-H 1/2-5/8 Grey Paint 40 1,174.4 SWH1258.1-GP 1/2-5/8 Red Paint 40 1,174.4 SWH1258.1-RP 3/4-7/8 Hot Dip Galv 40 1,267.8 SWH3478.1-H 3/4-7/8 Grey Paint 40 1,267.8 SWH3478.1-GP 3/4-7/8 Red Paint 40 1,267.8 SWH3478.1-RP 1"-1-1/8" Hot Dip Galv 25 1,752.4 SWH1118.1-H 1"-1-1/8" Grey Paint 25 1,752.4 SWH1118.1-GP 1"-1-1/8" Red Paint 25 1,752.4 SWH1118.1-RP **Technical Data will be sent upon request

Standard Hillside Washer Flanged Hillside Washer